New 32-bit 160A Racing level ESC for 1/10th RC Cars

Technical Spec

type:

Power wire spec: 12#160mmx2

Motor wire spec: 12#160mmx3

Power plug: none

Output plug: none

Basic Spec

Continuous output current: 160A

Peak output current (instantaneous): 760A

Battery cells: 2-3s lipo

BEC output: 6V/7.4V adjustable/4A

Programming Type

Parameter programming : Free ESC1 APP (Android & Apple APP)

Firmware online upgrade: supported

ESC size: 37x38x31.5mm

ESC weight: 101g

Product Feature:

1、32-bit microprocessor with more powerful processing capability and more accurate motor output.

2、Full aluminum case with highly efficient heat dissipation system and strong current resistance capability.

3、Plenty of adjustable parameters supports most types of racing.

Reverse mode   BOOST timing   TURBO TIMING   Throttle descent   Braking curve   Throttle response

Running mode   Braking frequency    Throttle attenuation    Braking response    BOOST triggering mode  

Throttle midpoint width    Forward braking force

4、The ESC has a built-in maximum BEC output current of 10A. The output voltage is adjustable at 6.0V/7.4V, easily meeting various powerful servos and high-voltage servos.

5、With Real-time data recording function, which supports real-time checking of ESC maximum temperature, motor speed, voltage, timing and other datas.

6、New software design with ultra-smooth startup and precise throttle linearity.

7、Bluetooth module is connected to adjust parameters and upgrade software through the mobile APP ( Supports real-time parameter adjustment. No need to restart the ESC )

8、Multiple protections: high-voltage protection, low-voltage protection, throttle signal loss protection, stall protection and over-temperature protection

Bluetooth

1.   Reset   password :   When   the   ESC   turns on,   press   and holding   the power button around 10 seconds, the ESC will restore   the   Bluetooth   password   to   default   setting 0000.

2. With RCOMG Bluetooth, connected the RCOMG   app to the   ESC, the user can program parameters, upgrade firmware and check the real-time data of the ESC on the APP.

3. Due   to the   range limit of   Bluetooth, the operational distance is around 10 meters.(If there are many metals or other   strong   interference   signals   or obstacles around will short

the operational distance)

4. The Bluetooth name can not be changed.

5. The   Bluetooth   connecting   will   be   failed during the ESC throttle calibration process.

Throttle Calibration

1. Connect   the ESC with the battery and receiver well, then turn on the transmitter.

2. Press and holding the power button until the blue LED is on   solid, the   motor   have   a   long   beep   at the same time, then   release   the power button, the red led will be on solid,

the ESC enters to the calibration mode.

3. Pull the   throttle   trigger   to   the full throttle position, the blue led   blinks   three times and the motor beeps once, the full throttle position is saved.

4. Push the throttle   trigger   to   the full   brake   position, the blue led blinks three times and   the motor beeps twice, the full brake position is saved.

5. Release the throttle   trigger   to   the neutral   position, the blue   led   blinks   three   times   and   the   motor   beeps three times, the throttle calibration is completed.

6. The ESC can support   reverse   throttle   calibration,   if the transmitter   throttle   set reverse   (it   means pull the throttle will go to 1000 throttle position/normally is 2000, and push the

throttle   will   go to   2000   throttle   position/normally is 1000), then you do the throttle calibration the same way as usual (as above), it will not have any effects on the ESC   for

ward and revers   way   even   if   the   transmitter   throttle set reverse.   Remark: No need to   restart   the   ESC again   after   throttle calibration finished. Do   not   move   the   throttle during

the time of the blue led blinks.

Android App downloading procedure

l.Scan   the QR code to download the App ( the name of the app is ESC1) with   any   search   engine.

2.Click “ download ”“ install ”“Open”and   choose allow to all the pop-upquestions   to turn on

Location Services & Bluetooth on   your   phone, and   then click “Connect” to connect   the ESC.

iPhone App downloading procedure

l.Search for   “ESC1 in   the App Store   or   scan   the   QR   code   to download   and   install   the App.

2.Turn on Location Services & Bluetooth on your phone, open the   App / ESC1   and then click“Connect”   to connect the ESC

Note

bluetooth programmer name : BLE-AD0B80E4-C284

The factory default password for   Bluetooth   is   0000   (with the   ESC   powered   on ,  

press and hold the power button for about 10 seconds to reset it to factory default ).